GoJohnnyGo
02-09-2006, 06:18 PM
Hi, I just wanted to know if any other xbox360 owners out there have purchased these Nyko Custom 360 Faceplate kits and wanting to share some designs or ideas.
Incase you didn't know, these Nyko Gameface kits lets to create and print your very own xbox360 custom faceplates. It comes with the standard blank and cover faceplate and upto 15 blanksheets to create your own designs plus 6 pre-printed designs and software. It's available at some major retailers like Harvey Normans etc.
http://console.hardocp.com/article.html?art=MTEzNSwxLCxoY29uc29sZQ==
I brought mine like right after I got my 360. I HAD to pimp my 360 up immediately (couldn't stand the plain dull white 360) plus didn't want to spend $100 on the PGR3 faceplate so I brought this kit instead.
I created this thread in hoping to share some other designs or ideas. I can't be the only one who brought this kit.
Here are just a couple of designs of what I've created so far. #Note I had to reshrink and convert the highres bmps to smaller jpegs so ALOT of the quality is gone. But it looks HOTTT on the software/ printed and on my 360.:D
http://www.xboxworld.com.au/forum/attachment.php?attachmentid=15696&stc=1&d=1157181009
http://www.xboxworld.com.au/forum/attachment.php?attachmentid=15697&stc=1&d=1157181034
http://www.xboxworld.com.au/forum/attachment.php?attachmentid=15698&stc=1&d=1157181044
I really like the Jareth one best because when the power button is on, it looks like he's holding a crystalball of green light (instead of the crystalballs in the movie) :D I'll try to take an actual picture of it on my 360 soon once I get a good camera still.
So lets share us some of your designs....
Incase you didn't know, these Nyko Gameface kits lets to create and print your very own xbox360 custom faceplates. It comes with the standard blank and cover faceplate and upto 15 blanksheets to create your own designs plus 6 pre-printed designs and software. It's available at some major retailers like Harvey Normans etc.
http://console.hardocp.com/article.html?art=MTEzNSwxLCxoY29uc29sZQ==
I brought mine like right after I got my 360. I HAD to pimp my 360 up immediately (couldn't stand the plain dull white 360) plus didn't want to spend $100 on the PGR3 faceplate so I brought this kit instead.
I created this thread in hoping to share some other designs or ideas. I can't be the only one who brought this kit.
Here are just a couple of designs of what I've created so far. #Note I had to reshrink and convert the highres bmps to smaller jpegs so ALOT of the quality is gone. But it looks HOTTT on the software/ printed and on my 360.:D
http://www.xboxworld.com.au/forum/attachment.php?attachmentid=15696&stc=1&d=1157181009
http://www.xboxworld.com.au/forum/attachment.php?attachmentid=15697&stc=1&d=1157181034
http://www.xboxworld.com.au/forum/attachment.php?attachmentid=15698&stc=1&d=1157181044
I really like the Jareth one best because when the power button is on, it looks like he's holding a crystalball of green light (instead of the crystalballs in the movie) :D I'll try to take an actual picture of it on my 360 soon once I get a good camera still.
So lets share us some of your designs....